RECIRCULATION FOR UNIFORMITY
+/-10F An alloy fan is mounted in the top. The motor is 1/6
STAINLESS STEEL INTERIOR - Back To Top
The entire interior is made of stainless steel for heat and corrosion resistance. The liner is designed to expand and contract with the heat.
BENCH MOUNTED CASE CONSTRUCTION - Back To Top
The oven case is constructed of 10, 14 and 16 gauge steel with an integrated bench stand. The case is primed with 800F silicone paint and finished in machine enamel.
SEVEN INCHES OF INSULATION - Back To Top
There is 1" of 2300F ceramic fiber insulation backed up with 6" of mineral wool. All insulation is sandwiched between the interior liner and exterior of the oven. No asbestos is used.
INCOLOY ELEMENTS - Back To Top
The elements are incoloy sheathed elements which are rated for 1600F. They are easily replaced.
GASKETED DOOR - Back To Top
The door is pivoted on the left. A woven fiberglass tadpole gasket and adjustable latch seal the door tightly.
DIGITAL PID CONTROL AND HIGH LIMIT SYSTEM - Back To Top
The standard control is a Honeywell UDC 2300 digital PID 3 mode tuning control. All fuses, transformers, contactors, and controls are located in a NEMA 1 panel mounted on the side. Panel includes a hinged door and generous internal spacing. Quiet, long life mercury power contactors are standard. The thermocouples are Type K. The control voltage is transformed to 120 volts. Control and power circuits are branch fused. Limit switch turns off power if the door is opened. A NEMA 13 lighted On/Off switch is included. A Honeywell UDC 2300 digital high limit back up control with manual reset, back up contactors and separate thermocouple is included as standard. Customer must connect fused power supply to single point on panel.
TESTING AND INSTRUCTIONS - Back To Top
The oven is power tested to insure proper watt ratings. A complete instruction manual includes easy start up instructions, theory of operation, maintenance instructions, parts list, and a detailed trouble shooting guide. A ladder logic diagram and panel layout are prepared on CAD for easy readability.
WARRANTY - Back To Top
The oven is warranted for one year except for elements and thermocouples (warranted for 6 months.)